/*-------------------------------------------------------------------------
   Register Declarations for Chipcon CC2430

   Written By -  Jesus Calvino-Fraga / jesusc at ece.ubc.ca (December 2006)
   (Based on CC2430 PRELIMINARY Data Sheet (rev. 1.03) SWRS036A)

   This library is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.

   This library is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   Lesser General Public License for more details.

   You should have received a copy of the GNU Lesser General Public
   License along with this library; if not, write to the Free Software
   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA

   In other words, you are welcome to use, share and improve this program.
   You are forbidden to forbid anyone else to use, share and improve
   what you give them.   Help stamp out software-hoarding!
-------------------------------------------------------------------------*/

#ifndef REG_CC2430_H
#define REG_CC2430_H

#include <compiler.h>

// Interrupt Vectors

#define RFERR_VECTOR    0   // RF TX FIFO underflow and RX FIFO overflow.
#define ADC_VECTOR      1   // ADC end of conversion
#define URX0_VECTOR     2   // USART0 RX complete
#define URX1_VECTOR     3   // USART1 RX complete
#define ENC_VECTOR      4   // AES encryption/decryption complete
#define ST_VECTOR       5   // Sleep Timer compare
#define P2INT_VECTOR    6   // Port 2 inputs
#define UTX0_VECTOR     7   // USART0 TX complete
#define DMA_VECTOR      8   // DMA transfer complete
#define T1_VECTOR       9   // Timer 1 (16-bit) capture/compare/overflow
#define T2_VECTOR       10  // Timer 2 (MAC Timer)
#define T3_VECTOR       11  // Timer 3 (8-bit) capture/compare/overflow
#define T4_VECTOR       12  // Timer 4 (8-bit) capture/compare/overflow
#define P0INT_VECTOR    13  // Port 0 inputs
#define UTX1_VECTOR     14  // USART1 TX complete
#define P1INT_VECTOR    15  // Port 1 inputs
#define RF_VECTOR       16  // RF general interrupts
#define WDT_VECTOR      17  // Watchdog overflow in timer mode

// SFR Registers and BITs

SFR(P0,       0x80); // Port 0
   SBIT(P0_0,     0x80, 0); // Port 0 bit 0
   SBIT(P0_1,     0x80, 1); // Port 0 bit 1
   SBIT(P0_2,     0x80, 2); // Port 0 bit 2
   SBIT(P0_3,     0x80, 3); // Port 0 bit 3
   SBIT(P0_4,     0x80, 4); // Port 0 bit 4
   SBIT(P0_5,     0x80, 5); // Port 0 bit 5
   SBIT(P0_6,     0x80, 6); // Port 0 bit 6
   SBIT(P0_7,     0x80, 7); // Port 0 bit 7
SFR(SP,       0x81); // Stack Pointer
SFR(DPL0,     0x82); // Data Pointer 0 Low Byte
SFR(DPH0,     0x83); // Data Pointer 0 High Byte
SFR(DPL1,     0x84); // Data Pointer 1 Low Byte
SFR(DPH1,     0x85); // Data Pointer 1 High Byte
SFR(U0CSR,    0x86); // USART 0 Control and Status
SFR(PCON,     0x87); // Power Mode Control
SFR(TCON,     0x88); // Interrupt Flags
   SBIT(IT0,      0x88, 0); // reserved (must always be set to 1)
   SBIT(RFERRIF,  0x88, 1); // RFERR – RF TX/RX FIFO interrupt flag
   SBIT(IT1,      0x88, 2); // reserved (must always be set to 1)
   SBIT(URX0IF,   0x88, 3); // USART0 RX Interrupt Flag
   SBIT(ADCIF,    0x88, 5); // ADC Interrupt Flag
   SBIT(URX1IF,   0x88, 7); // USART1 RX Interrupt Flag
SFR(P0IFG,    0x89); // Port 0 Interrupt Status Flag
SFR(P1IFG,    0x8A); // Port 1 Interrupt Status Flag
SFR(P2IFG,    0x8B); // Port 2 Interrupt Status Flag
SFR(PICTL,    0x8C); // Port Interrupt Control
SFR(P1IEN,    0x8D); // Port 1 Interrupt Mask
SFR(P0INP,    0x8F); // Port 0 Input Mode
SFR(P1,       0x90); // Port 1
   SBIT(P1_0,     0x90, 0); // Port 1 bit 0
   SBIT(P1_1,     0x90, 1); // Port 1 bit 1
   SBIT(P1_2,     0x90, 2); // Port 1 bit 2
   SBIT(P1_3,     0x90, 3); // Port 1 bit 3
   SBIT(P1_4,     0x90, 4); // Port 1 bit 4
   SBIT(P1_5,     0x90, 5); // Port 1 bit 5
   SBIT(P1_6,     0x90, 6); // Port 1 bit 6
   SBIT(P1_7,     0x90, 7); // Port 1 bit 7
SFR(RFIM,     0x91); // RF Interrupt Mask
SFR(DPS,      0x92); // Data Pointer Select
SFR(MPAGE,    0x93); // Memory Page Select
SFR(_XPAGE,   0x93); // Memory Page Select under the name SDCC needs it
SFR(T2CMP,    0x94); // Timer 2 Compare Value
SFR(ST0,      0x95); // Sleep Timer 0
SFR(ST1,      0x96); // Sleep Timer 1
SFR(ST2,      0x97); // Sleep Timer 2
SFR(S0CON,    0x98); // Interrupt Flags 2
   SBIT(ENCIF_0,  0x98, 0); // AES Interrupt Flag 0
   SBIT(ENCIF_1,  0x98, 1); // AES Interrupt Flag 1
SFR(IEN2,     0x9A); // Interrupt Enable 2
SFR(S1CON,    0x9B); // Interrupt Flags 3
SFR(T2PEROF0, 0x9C); // Timer 2 Overflow Capture/Compare 0
SFR(T2PEROF1, 0x9D); // Timer 2 Overflow Capture/Compare 1
SFR(T2PEROF2, 0x9E); // Timer 2 Overflow Capture/Compare 2
SFR(P2,       0xA0); // Port 2
   SBIT(P2_0,     0xA0, 0); // Port 2 bit 0
   SBIT(P2_1,     0xA0, 1); // Port 2 bit 1
   SBIT(P2_2,     0xA0, 2); // Port 2 bit 2
   SBIT(P2_3,     0xA0, 3); // Port 2 bit 3
   SBIT(P2_4,     0xA0, 4); // Port 2 bit 4
   SBIT(P2_5,     0xA0, 5); // Port 2 bit 5
   SBIT(P2_6,     0xA0, 6); // Port 2 bit 6
   SBIT(P2_7,     0xA0, 7); // Port 2 bit 7
SFR(T2OF0,    0xA1); // Timer 2 Overflow Count 0
SFR(T2OF1,    0xA2); // Timer 2 Overflow Count 1
SFR(T2OF2,    0xA3); // Timer 2 Overflow Count 2
SFR(T2CAPLPL, 0xA4); // Timer 2 Period Low Byte
SFR(T2CAPHPH, 0xA5); // Timer 2 Period High Byte
SFR(T2TLD,    0xA6); // Timer 2 Timer Value Low Byte
SFR(T2THD,    0xA7); // Timer 2 Timer Value High Byte
SFR(IEN0,     0xA8); // Interrupt Enable 0
   SBIT(RFERRIE,  0xA8, 0); // RF TX/RX FIFO interrupt enable
   SBIT(ADCIE,    0xA8, 1); // ADC Interrupt Enable
   SBIT(URX0IE,   0xA8, 2); // USART0 RX Interrupt Enable
   SBIT(URX1IE,   0xA8, 3); // USART1 RX Interrupt Enable
   SBIT(ENCIE,    0xA8, 4); // AES Encryption/Decryption Interrupt Enable
   SBIT(STIE,     0xA8, 5); // Sleep Timer Interrupt Enable
   SBIT(EA,       0xA8, 7); // Global Interrupt Enable
SFR(IP0,      0xA9); // Interrupt Priority 0
SFR(FWT,      0xAB); // Flash Write Timing
SFR(FADDRL,   0xAC); // Flash Address Low Byte
SFR(FADDRH,   0xAD); // Flash Address High Byte
SFR(FCTL,     0xAE); // Flash Control
SFR(FWDATA,   0xAF); // Flash Write Data
SFR(ENCDI,    0xB1); // Encryption Input Data
SFR(ENCDO,    0xB2); // Encryption Output Data
SFR(ENCCS,    0xB3); // Encryption Control and Status
SFR(ADCCON1,  0xB4); // ADC Control 1
SFR(ADCCON2,  0xB5); // ADC Control 2
SFR(ADCCON3,  0xB6); // ADC Control 3
SFR(IEN1,     0xB8); // Interrupt Enable 1
   SBIT(DMAIE,    0xB8, 0); // DMA Transfer Interrupt Enable
   SBIT(T1IE,     0xB8, 1); // Timer 1 Interrupt Enable
   SBIT(T2IE,     0xB8, 2); // Timer 2 Interrupt Enable
   SBIT(T3IE,     0xB8, 3); // Timer 3 Interrupt Enable
   SBIT(T4IE,     0xB8, 4); // Timer 4 Interrupt Enable
   SBIT(P0IE,     0xB8, 5); // Port 0 Interrupt Enable
SFR(IP1,      0xB9); // Interrupt Priority 1
SFR(ADCL,     0xBA); // ADC Data Low
SFR(ADCH,     0xBB); // ADC Data High
SFR(RNDL,     0xBC); // Random Number Generator Data Low Byte
SFR(RNDH,     0xBD); // Random Number Generator Data High Byte
SFR(SLEEP,    0xBE); // Sleep Mode Control
SFR(IRCON,    0xC0); // Interrupt Flags 4
   SBIT(DMAIF,    0xC0, 0); // DMA Complete Interrupt Flag
   SBIT(T1IF,     0xC0, 1); // Timer 1 Interrupt Flag
   SBIT(T2IF,     0xC0, 2); // Timer 2 Interrupt Flag
   SBIT(T3IF,     0xC0, 3); // Timer 3 Interrupt Flag
   SBIT(T4IF,     0xC0, 4); // Timer 4 Interrupt Flag
   SBIT(P0IF,     0xC0, 5); // Port 0 Interrupt Flag
   SBIT(STIF,     0xC0, 7); // Sleep Timer Interrupt Flag
SFR(U0DBUF,   0xC1); // USART 0 Receive/Transmit Data Buffer
SFR(U0BAUD,   0xC2); // USART 0 Baud Rate Control
SFR(T2CNF,    0xC3); // Timer 2 Configuration
SFR(U0UCR,    0xC4); // USART 0 UART Control
SFR(U0GCR,    0xC5); // USART 0 Generic Control
SFR(CLKCON,   0xC6); // Clock Control
SFR(MEMCTR,   0xC7); // Memory Arbiter Control
SFR(WDCTL,    0xC9); // Watchdog Timer Control
SFR(T3CNT,    0xCA); // Timer 3 Counter
SFR(T3CTL,    0xCB); // Timer 3 Control
SFR(T3CCTL0,  0xCC); // Timer 3 Channel 0 Capture/Compare Control
SFR(T3CC0,    0xCD); // Timer 3 Channel 0 Capture/Compare Value
SFR(T3CCTL1,  0xCE); // Timer 3 Channel 1 Capture/Compare Control
SFR(T3CC1,    0xCF); // Timer 3 Channel 1 Capture/Compare Value
SFR(PSW,      0xD0); // Program Status Word
   SBIT(P,        0xD0, 0); // Parity Flag
   SBIT(F1,       0xD0, 1); // User-Defined Flag
   SBIT(OV,       0xD0, 2); // Overflow Flag
   SBIT(RS0,      0xD0, 3); // Register Bank Select 0
   SBIT(RS1,      0xD0, 4); // Register Bank Select 1
   SBIT(F0,       0xD0, 5); // User-Defined Flag
   SBIT(AC,       0xD0, 6); // Auxiliary Carry Flag
   SBIT(CY,       0xD0, 7); // Carry Flag
SFR(DMAIRQ,   0xD1); // DMA Interrupt Flag
SFR(DMA1CFGL, 0xD2); // DMA Channel 1-4 Configuration Address Low Byte
SFR(DMA1CFGH, 0xD3); // DMA Channel 1-4 Configuration Address High Byte
SFR(DMA0CFGL, 0xD4); // DMA Channel 0 Configuration Address Low Byte
SFR(DMA0CFGH, 0xD5); // DMA Channel 0 Configuration Address High Byte
SFR(DMAARM,   0xD6); // DMA Channel Arm
SFR(DMAREQ,   0xD7); // DMA Channel Start Request and Status
SFR(TIMIF,    0xD8); // Timers 1/3/4 Interrupt Mask/Flag
   SBIT(T3OVFIF,  0xD8, 0); // Timer 3 overflow interrupt flag 0:no pending 1:pending
   SBIT(T3CH0IF,  0xD8, 1); // Timer 3 channel 0 interrupt flag 0:no pending 1:pending
   SBIT(T3CH1IF,  0xD8, 2); // Timer 3 channel 1 interrupt flag 0:no pending 1:pending
   SBIT(T4OVFIF,  0xD8, 3); // Timer 4 overflow interrupt flag 0:no pending 1:pending
   SBIT(T4CH0IF,  0xD8, 4); // Timer 4 channel 0 interrupt flag 0:no pending 1:pending
   SBIT(T4CH1IF,  0xD8, 5); // Timer 4 channel 1 interrupt flag 0:no pending 1:pending
   SBIT(OVFIM,    0xD8, 6); // Timer 1 overflow interrupt mask
SFR(RFD,      0xD9); // RF Data
SFR(T1CC0L,   0xDA); // Timer 1 Channel 0 Capture/Compare Value Low
SFR(T1CC0H,   0xDB); // Timer 1 Channel 0 Capture/Compare Value High
SFR(T1CC1L,   0xDC); // Timer 1 Channel 1 Capture/Compare Value Low
SFR(T1CC1H,   0xDD); // Timer 1 Channel 1 Capture/Compare Value High
SFR(T1CC2L,   0xDE); // Timer 1 Channel 2 Capture/Compare Value Low
SFR(T1CC2H,   0xDF); // Timer 1 Channel 2 Capture/Compare Value High
SFR(ACC,      0xE0); // Accumulator
   SBIT(ACC_0,    0xE0, 0); // Accumulator bit 0
   SBIT(ACC_1,    0xE0, 1); // Accumulator bit 1
   SBIT(ACC_2,    0xE0, 2); // Accumulator bit 2
   SBIT(ACC_3,    0xE0, 3); // Accumulator bit 3
   SBIT(ACC_4,    0xE0, 4); // Accumulator bit 4
   SBIT(ACC_5,    0xE0, 5); // Accumulator bit 5
   SBIT(ACC_6,    0xE0, 6); // Accumulator bit 6
   SBIT(ACC_7,    0xE0, 7); // Accumulator bit 7
SFR(RFST,     0xE1); // RF CSMA-CA / Strobe Processor
SFR(T1CNTL,   0xE2); // Timer 1 Counter Low
SFR(T1CNTH,   0xE3); // Timer 1 Counter High
SFR(T1CTL,    0xE4); // Timer 1 Control and Status
SFR(T1CCTL0,  0xE5); // Timer 1 Channel 0 Capture/Compare Control
SFR(T1CCTL1,  0xE6); // Timer 1 Channel 1 Capture/Compare Control
SFR(T1CCTL2,  0xE7); // Timer 1 Channel 2 Capture/Compare Control
SFR(IRCON2,   0xE8); // Interrupt Flags 5
   SBIT(P2IF,     0xE8, 0); // Port 2 Interrupt Flag
   SBIT(UTX0IF,   0xE8, 1); // USART0 TX Interrupt Flag
   SBIT(UTX1IF,   0xE8, 2); // USART1 TX Interrupt Flag
   SBIT(P1IF,     0xE8, 3); // Port 1 Interrupt Flag
   SBIT(WDTIF,    0xE8, 4); // Watchdog Timer Interrupt Flag
SFR(RFIF,     0xE9); // RF Interrupt Flags
SFR(T4CNT,    0xEA); // Timer 4 Counter
SFR(T4CTL,    0xEB); // Timer 4 Control
SFR(T4CCTL0,  0xEC); // Timer 4 Channel 0 Capture/Compare Control
SFR(T4CC0,    0xED); // Timer 4 Channel 0 Capture/Compare Value
SFR(T4CCTL1,  0xEE); // Timer 4 Channel 1 Capture/Compare Control
SFR(T4CC1,    0xEF); // Timer 4 Channel 1 Capture/Compare Value
SFR(B,        0xF0); // B Register
   SBIT(B_0,      0xF0, 0); // Register B bit 0
   SBIT(B_1,      0xF0, 1); // Register B bit 1
   SBIT(B_2,      0xF0, 2); // Register B bit 2
   SBIT(B_3,      0xF0, 3); // Register B bit 3
   SBIT(B_4,      0xF0, 4); // Register B bit 4
   SBIT(B_5,      0xF0, 5); // Register B bit 5
   SBIT(B_6,      0xF0, 6); // Register B bit 6
   SBIT(B_7,      0xF0, 7); // Register B bit 7
SFR(PERCFG,   0xF1); // Peripheral Control
SFR(ADCCFG,   0xF2); // ADC Input Configuration
SFR(P0SEL,    0xF3); // Port 0 Function Select
SFR(P1SEL,    0xF4); // Port 1 Function Select
SFR(P2SEL,    0xF5); // Port 2 Function Select
SFR(P1INP,    0xF6); // Port 1 Input Mode
SFR(P2INP,    0xF7); // Port 2 Input Mode
SFR(U1CSR,    0xF8); // USART 1 Control and Status
   SBIT(ACTIVE,   0xF8, 0); // USART transmit/receive active status 0:idle 1:busy
   SBIT(TX_BYTE,  0xF8, 1); // Transmit byte status 0:Byte not transmitted 1:Last byte transmitted
   SBIT(RX_BYTE,  0xF8, 2); // Receive byte status 0:No byte received 1:Received byte ready
   SBIT(ERR,      0xF8, 3); // UART parity error status 0:No error 1:parity error
   SBIT(FE,       0xF8, 4); // UART framing error status 0:No error 1:incorrect stop bit level
   SBIT(SLAVE,    0xF8, 5); // SPI master or slave mode select 0:master 1:slave
   SBIT(RE,       0xF8, 6); // UART receiver enable 0:disabled 1:enabled
   SBIT(MODE,     0xF8, 7); // USART mode select 0:SPI 1:UART
SFR(U1DBUF,   0xF9); // USART 1 Receive/Transmit Data Buffer
SFR(U1BAUD,   0xFA); // USART 1 Baud Rate Control
SFR(U1UCR,    0xFB); // USART 1 UART Control
SFR(U1GCR,    0xFC); // USART 1 Generic Control
SFR(P0DIR,    0xFD); // Port 0 Direction
SFR(P1DIR,    0xFE); // Port 1 Direction
SFR(P2DIR,    0xFF); // Port 2 Direction

// From Table 45 : Overview of RF registers

SFRX(MDMCTRL0H,  0xDF02); // Modem Control 0,  high
SFRX(MDMCTRL0L,  0xDF03); // Modem Control 0,  low
SFRX(MDMCTRL1H,  0xDF04); // Modem Control 1,  high
SFRX(MDMCTRL1L,  0xDF05); // Modem Control 1,  low
SFRX(RSSIH,      0xDF06); // RSSI and CCA Status and Control,  high
SFRX(RSSIL,      0xDF07); // RSSI and CCA Status and Control,  low
SFRX(SYNCWORDH,  0xDF08); // Synchronisation Word Control,  high
SFRX(SYNCWORDL,  0xDF09); // Synchronisation Word Control,  low
SFRX(TXCTRLH,    0xDF0A); // Transmit Control,  high
SFRX(TXCTRLL,    0xDF0B); // Transmit Control,  low
SFRX(RXCTRL0H,   0xDF0C); // Receive Control 0,  high
SFRX(RXCTRL0L,   0xDF0D); // Receive Control 0,  low
SFRX(RXCTRL1H,   0xDF0E); // Receive Control 1,  high
SFRX(RXCTRL1L,   0xDF0F); // Receive Control 1,  low
SFRX(FSCTRLH,    0xDF10); // Frequency Synthesizer Control and Status,  high
SFRX(FSCTRLL,    0xDF11); // Frequency Synthesizer Control and Status,  low
SFRX(CSPX,       0xDF12); // CSP X Data
SFRX(CSPY,       0xDF13); // CSP Y Data
SFRX(CSPZ,       0xDF14); // CSP Z Data
SFRX(CSPCTRL,    0xDF15); // CSP Control
SFRX(CSPT,       0xDF16); // CSP T Data
SFRX(RFPWR,      0xDF17); // RF Power Control
SFRX(FSMTCH,     0xDF20); // Finite State Machine Time Constants,  high
SFRX(FSMTCL,     0xDF21); // Finite State Machine Time Constants,  low
SFRX(MANANDH,    0xDF22); // Manual AND Override,  high
SFRX(MANANDL,    0xDF23); // Manual AND Override,  low
SFRX(MANORH,     0xDF24); // Manual OR Override,  high
SFRX(MANORL,     0xDF25); // Manual OR Override,  low
SFRX(AGCCTRLH,   0xDF26); // AGC Control,  high
SFRX(AGCCTRLL,   0xDF27); // AGC Control,  low
SFRX(FSMSTATE,   0xDF39); // Finite State Machine State Status
SFRX(ADCTSTH,    0xDF3A); // ADC Test,  high
SFRX(ADCTSTL,    0xDF3B); // ADC Test,  low
SFRX(DACTSTH,    0xDF3C); // DAC Test,  high
SFRX(DACTSTL,    0xDF3D); // DAC Test,  low
SFRX(IEEE_ADDR0, 0xDF43); // IEEE Address 0
SFRX(IEEE_ADDR1, 0xDF44); // IEEE Address 1
SFRX(IEEE_ADDR2, 0xDF45); // IEEE Address 2
SFRX(IEEE_ADDR3, 0xDF46); // IEEE Address 3
SFRX(IEEE_ADDR4, 0xDF47); // IEEE Address 4
SFRX(IEEE_ADDR5, 0xDF48); // IEEE Address 5
SFRX(IEEE_ADDR6, 0xDF49); // IEEE Address 6
SFRX(IEEE_ADDR7, 0xDF4A); // IEEE Address 7
SFRX(PANIDH,     0xDF4B); // PAN Identifier,  high
SFRX(PANIDL,     0xDF4C); // PAN Identifier,  low
SFRX(SHORTADDRH, 0xDF4D); // Short Address,  high
SFRX(SHORTADDRL, 0xDF4E); // Short Address,  low
SFRX(IOCFG0,     0xDF4F); // I/O Configuration 0
SFRX(IOCFG1,     0xDF50); // I/O Configuration 1
SFRX(IOCFG2,     0xDF51); // I/O Configuration 2
SFRX(IOCFG3,     0xDF52); // I/O Configuration 3
SFRX(RXFIFOCNT,  0xDF53); // RX FIFO Count
SFRX(FSMTC1,     0xDF54); // Finite State Machine Control
SFRX(CHVER,      0xDF60); // Chip Version
SFRX(CHIPID,     0xDF61); // Chip Identification
SFRX(RFSTATUS,   0xDF62); // RF Status

// SFRs also accesible through XDATA space

SFRX(X_U0CSR,    0xDF86); // USART 0 Control and Status
SFRX(X_P0IFG,    0xDF89); // Port 0 Interrupt Status Flag
SFRX(X_P1IFG,    0xDF8A); // Port 1 Interrupt Status Flag
SFRX(X_P2IFG,    0xDF8B); // Port 2 Interrupt Status Flag
SFRX(X_PICTL,    0xDF8C); // Port Interrupt Control
SFRX(X_P1IEN,    0xDF8D); // Port 1 Interrupt Mask
SFRX(X_P0INP,    0xDF8F); // Port 0 Input Mode
SFRX(X_RFIM,     0xDF91); // RF Interrupt Mask
SFRX(X_MPAGE,    0xDF93); // Memory Page Select
SFRX(X_T2CMP,    0xDF94); // Timer 2 Compare Value
SFRX(X_ST0,      0xDF95); // Sleep Timer 0
SFRX(X_ST1,      0xDF96); // Sleep Timer 1
SFRX(X_ST2,      0xDF97); // Sleep Timer 2
SFRX(X_T2PEROF0, 0xDF9C); // Timer 2 Overflow Capture/Compare 0
SFRX(X_T2PEROF1, 0xDF9D); // Timer 2 Overflow Capture/Compare 1
SFRX(X_T2PEROF2, 0xDF9E); // Timer 2 Overflow Capture/Compare 2
SFRX(X_T2OF0,    0xDFA1); // Timer 2 Overflow Count 0
SFRX(X_T2OF1,    0xDFA2); // Timer 2 Overflow Count 1
SFRX(X_T2OF2,    0xDFA3); // Timer 2 Overflow Count 2
SFRX(X_T2CAPLPL, 0xDFA4); // Timer 2 Period Low Byte
SFRX(X_T2CAPHPH, 0xDFA5); // Timer 2 Period High Byte
SFRX(X_T2TLD,    0xDFA6); // Timer 2 Timer Value Low Byte
SFRX(X_T2THD,    0xDFA7); // Timer 2 Timer Value High Byte
SFRX(X_FWT,      0xDFAB); // Flash Write Timing
SFRX(X_FADDRL,   0xDFAC); // Flash Address Low Byte
SFRX(X_FADDRH,   0xDFAD); // Flash Address High Byte
SFRX(X_FCTL,     0xDFAE); // Flash Control
SFRX(X_FWDATA,   0xDFAF); // Flash Write Data
SFRX(X_ENCDI,    0xDFB1); // Encryption Input Data
SFRX(X_ENCDO,    0xDFB2); // Encryption Output Data
SFRX(X_ENCCS,    0xDFB3); // Encryption Control and Status
SFRX(X_ADCCON1,  0xDFB4); // ADC Control 1
SFRX(X_ADCCON2,  0xDFB5); // ADC Control 2
SFRX(X_ADCCON3,  0xDFB6); // ADC Control 3
SFRX(X_ADCL,     0xDFBA); // ADC Data Low
SFRX(X_ADCH,     0xDFBB); // ADC Data High
SFRX(X_RNDL,     0xDFBC); // Random Number Generator Data Low Byte
SFRX(X_RNDH,     0xDFBD); // Random Number Generator Data High Byte
SFRX(X_SLEEP,    0xDFBE); // Sleep Mode Control
SFRX(X_U0DBUF,   0xDFC1); // USART 0 Receive/Transmit Data Buffer
SFRX(X_U0BAUD,   0xDFC2); // USART 0 Baud Rate Control
SFRX(X_T2CNF,    0xDFC3); // Timer 2 Configuration
SFRX(X_U0UCR,    0xDFC4); // USART 0 UART Control
SFRX(X_U0GCR,    0xDFC5); // USART 0 Generic Control
SFRX(X_CLKCON,   0xDFC6); // Clock Control
SFRX(X_MEMCTR,   0xDFC7); // Memory Arbiter Control
SFRX(X_WDCTL,    0xDFC9); // Watchdog Timer Control
SFRX(X_T3CNT,    0xDFCA); // Timer 3 Counter
SFRX(X_T3CTL,    0xDFCB); // Timer 3 Control
SFRX(X_T3CCTL0,  0xDFCC); // Timer 3 Channel 0 Capture/Compare Control
SFRX(X_T3CC0,    0xDFCD); // Timer 3 Channel 0 Capture/Compare Value
SFRX(X_T3CCTL1,  0xDFCE); // Timer 3 Channel 1 Capture/Compare Control
SFRX(X_T3CC1,    0xDFCF); // Timer 3 Channel 1 Capture/Compare Value
SFRX(X_DMAIRQ,   0xDFD1); // DMA Interrupt Flag
SFRX(X_DMA1CFGL, 0xDFD2); // DMA Channel 1-4 Configuration Address Low Byte
SFRX(X_DMA1CFGH, 0xDFD3); // DMA Channel 1-4 Configuration Address High Byte
SFRX(X_DMA0CFGL, 0xDFD4); // DMA Channel 0 Configuration Address Low Byte
SFRX(X_DMA0CFGH, 0xDFD5); // DMA Channel 0 Configuration Address High Byte
SFRX(X_DMAARM,   0xDFD6); // DMA Channel Arm
SFRX(X_DMAREQ,   0xDFD7); // DMA Channel Start Request and Status
SFRX(X_TIMIF,    0xDFD8); // Timers 1/3/4 Interrupt Mask/Flag
SFRX(X_RFD,      0xDFD9); // RF Data
SFRX(X_T1CC0L,   0xDFDA); // Timer 1 Channel 0 Capture/Compare Value Low
SFRX(X_T1CC0H,   0xDFDB); // Timer 1 Channel 0 Capture/Compare Value High
SFRX(X_T1CC1L,   0xDFDC); // Timer 1 Channel 1 Capture/Compare Value Low
SFRX(X_T1CC1H,   0xDFDD); // Timer 1 Channel 1 Capture/Compare Value High
SFRX(X_T1CC2L,   0xDFDE); // Timer 1 Channel 2 Capture/Compare Value Low
SFRX(X_T1CC2H,   0xDFDF); // Timer 1 Channel 2 Capture/Compare Value High
SFRX(X_RFST,     0xDFE1); // RF CSMA-CA / Strobe Processor
SFRX(X_T1CNTL,   0xDFE2); // Timer 1 Counter Low
SFRX(X_T1CNTH,   0xDFE3); // Timer 1 Counter High
SFRX(X_T1CTL,    0xDFE4); // Timer 1 Control and Status
SFRX(X_T1CCTL0,  0xDFE5); // Timer 1 Channel 0 Capture/Compare Control
SFRX(X_T1CCTL1,  0xDFE6); // Timer 1 Channel 1 Capture/Compare Control
SFRX(X_T1CCTL2,  0xDFE7); // Timer 1 Channel 2 Capture/Compare Control
SFRX(X_RFIF,     0xDFE9); // RF Interrupt Flags
SFRX(X_T4CNT,    0xDFEA); // Timer 4 Counter
SFRX(X_T4CTL,    0xDFEB); // Timer 4 Control
SFRX(X_T4CCTL0,  0xDFEC); // Timer 4 Channel 0 Capture/Compare Control
SFRX(X_T4CC0,    0xDFED); // Timer 4 Channel 0 Capture/Compare Value
SFRX(X_T4CCTL1,  0xDFEE); // Timer 4 Channel 1 Capture/Compare Control
SFRX(X_T4CC1,    0xDFEF); // Timer 4 Channel 1 Capture/Compare Value
SFRX(X_PERCFG,   0xDFF1); // Peripheral Control
SFRX(X_ADCCFG,   0xDFF2); // ADC Input Configuration
SFRX(X_P0SEL,    0xDFF3); // Port 0 Function Select
SFRX(X_P1SEL,    0xDFF4); // Port 1 Function Select
SFRX(X_P2SEL,    0xDFF5); // Port 2 Function Select
SFRX(X_P1INP,    0xDFF6); // Port 1 Input Mode
SFRX(X_P2INP,    0xDFF7); // Port 2 Input Mode
SFRX(X_U1CSR,    0xDFF8); // USART 1 Control and Status
SFRX(X_U1DBUF,   0xDFF9); // USART 1 Receive/Transmit Data Buffer
SFRX(X_U1BAUD,   0xDFFA); // USART 1 Baud Rate Control
SFRX(X_U1UCR,    0xDFFB); // USART 1 UART Control
SFRX(X_U1GCR,    0xDFFC); // USART 1 Generic Control
SFRX(X_P0DIR,    0xDFFD); // Port 0 Direction
SFRX(X_P1DIR,    0xDFFE); // Port 1 Direction
SFRX(X_P2DIR,    0xDFFF); // Port 2 Direction

#endif //REG_CC2430_H
